METAL WORKING FLUIDS

SKU: 22200-DRUM

Multidraw Drylube E 1 is a coil coating lubricant for all types of metal. It’s a hotmelt based on mineral oil and contains hydrocarbons of higher melting weight. It’s free from water and solvents.

SKU: 96930-V038

Multidraw KTL N 1 is a coil and blank washing oil used in sheet metal forming. It’s a mineral oil-based product that contains synthetic greasing agents and phosphorous additives. Multidraw KTL N 1 is used for cleaning in coil and blank washing systems before the forming operation.

SKU: 09335-F027

Multidraw 73 is a lubricant made by Zeller+Gmelin. It’s a non-water-miscible punching and drawing oil that’s used for processing aluminum profiles. It’s a transparent, odor-neutral mixture of paraffinic hydrocarbons that evaporates residue-free. Multidraw 73 is used in rapid-machining centers to fabricate aluminum profiles for windows and doors.

SKU: 73461200009

Cindol 4612 is a solvent-based vanishing lubricant that is used for light stamping of ferrous and non-ferrous metals. The odorless carrier solvent evaporates quickly and leaves behind minimal residue, so no cleaning is necessary after the stock leaves the press.

SKU: 184452

Total MARTOL 46 S is a chlorine-free, drawing and forming lubricant for ferrous and non-ferrous metals. It is a stamping oil that is part of Total Lubricants USA, Inc.‘s metalworking lubricants, coolants, and fluids.

SKU: 20931-TOTE

Multidraw KTL N 16 is a mineral oil-based drawing and punching oil. It is non-water-miscible and contains synthetic greasing agents, corrosion inhibitors, and additives. It is free of silicone oils. Multidraw KTL N 16 is recommended for spot lubrication of parts treated with Multidraw PL 61. It offers excellent drawing results, outstanding corrosion protection, and high aging stability.

SKU: 09335-60L

Multidraw 73 is a lubricant made by Zeller+Gmelin. It’s a non-water-miscible punching and drawing oil that’s used for processing aluminum profiles. It’s a transparent, odor-neutral mixture of paraffinic hydrocarbons that evaporates residue-free. Multidraw 73 is used in rapid-machining centers to fabricate aluminum profiles for windows and doors.

SKU: 23010

Multidraw ALF 4 is a forming oil for aluminum and its alloys. It is a low-viscosity, non-water-miscible metal processing oil. It is based on mineral oils and has a low aromatic content. It also contains synthetic fatty components.

SKU: 20931-PAIL

Multidraw KTL N 16 is a mineral oil-based drawing and punching oil. It is non-water-miscible and contains synthetic greasing agents, corrosion inhibitors, and additives. It is free of silicone oils. Multidraw KTL N 16 is recommended for spot lubrication of parts treated with Multidraw PL 61. It offers excellent drawing results, outstanding corrosion protection, and high aging stability.

SKU: 21500-DRUM

Multicut Micro SP 51 is a synthetic-based, non-water-miscible metalworking oil. It contains sulfurous additives and is designed for use in micro spraying technology. Multicut Micro SP 51 is particularly suitable for cutting steel and aluminum.