METAL WORKING FLUIDS

SKU: 23422500002

Rust Veto 4222-S is a water-emulsifiable rust preventive that provides excellent humidity protection. It is barium-free and leaves a thin film that protects against corrosion on plain carbon or low alloy steel. The basic material is mineral oil, and it comes in a clear, amber oil color. It is not recommended for painted surfaces because it may remove paint.

SKU: 26000600033

Houghton Ensis DWO 600 is a VOC-free, short-term rust preventive oil. It contains dewatering additives and film-forming substances. After drying, it leaves an oily film with dewatering properties.

SKU: 275660

Zeller+Gmelin developed Multicut Flowgrind P 32 as a precision deburring product for the Bosch Group. Multicut Flowgrind P 32 is a lubricating oil that carries abrasive materials. It is zinc-free and chemically activated.

SKU: 28820

Multidraw WM Spezial is a water-miscible drawing oil concentrate from Zeller+Gmelin. It’s based on mineral oil and is free of chlorine-containing components. It also contains natural greasing agents and a special corrosion inhibitor.

SKU: 28870-K030

Zubora 65 H Extra is a water-miscible, semi-synthetic, high-performance cooling lubricant. It is boron-free and based on mineral oil. The special formulation makes it particularly bio-stable.

SKU: 30540

Zeller+Gmelin’s Multicut Basic 20 Extra is a non-water-miscible, high-alloyed cutting oil with low viscosity. It’s made from mineral oils with low aromatic content.

SKU: 36245000009

Houghton Aqua-Quench 245 is a bio-stable polymer quenchant that comes in a 5 gallon pail. It is designed for induction hardening and immersion quenching of higher hardenability steel alloys. The product is hazy in color and has a flash point of 0°F.

SKU: 41124388014

Macron 205 M-8 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

SKU: 42010208009

Houghton Adrana D 208 is a water-miscible metalworking fluid that can be used for easy to medium duty applications on ferrous metals. It is recommended for use on cast iron and low to medium alloyed ferrous metals.

SKU: 42480000011

Houghton Hocut 4800 is a heavy-duty, soluble oil coolant with extreme pressure additives. It’s biostable and can be used for machining aluminum alloys and exotic metals. It’s also suitable for series stainless steel.