Browse Categories

Search in Category

METAL WORKING FLUIDS

Filter Your Search

Shop by Category

Loading...

METAL WORKING FLUIDS

OILS AND LUBRICANTS /INDUSTRIAL/METAL WORKING FLUIDS 
Viewing Page 4 of 22 (219 results)
ZEL MULTIROLL CU PROTECT 10 LITER PAIL

ZEL MULTIROLL CU PROTECT 10 LITER PAIL

Manufacturer Part #: 22621-K020
SKU: 22620-K020
Brand: ZELLER + GMELIN

Zeller+Gmelin’s Multiroll CU Protect is an additive that prevents corrosion for the Multiroll CU product line. It’s a fully synthetic, water-soluble drawing lubricant for copper and aluminum wire. It can be sprayed on to help with winding up the wire.

UOM : PL (2 GA)

Add to Quote
ZEL MULTICAL M5 - 170 KG  DRUM

ZEL MULTICAL M5 - 170 KG DRUM

Manufacturer Part #: 25930
SKU: 25930
Brand: ZELLER + GMELIN

Multical M5 is a solvent-free calibration lubricant from Zeller+Gmelin. It is a mineral oil that contains calibration oil. Multical M5 is applied to sintered metal parts by injection. It has a density of 850 kg/m3 at 15°C and a viscosity of 10.5 mm2/s at 20°C.

UOM : DR (45 GA)

Add to Quote

HOU ENSIS DWO 600 DRUM

Manufacturer Part #: 26000600033
SKU: 26000600033
Brand: HOUGHTON

Houghton Ensis DWO 600 is a VOC-free, short-term rust preventive oil. It contains dewatering additives and film-forming substances. After drying, it leaves an oily film with dewatering properties.

UOM : DR (55 GA)

Add to Quote
ZEL MULTICUT FLOWGRIND P 32 180 KG DRUM

ZEL MULTICUT FLOWGRIND P 32 180 KG DRUM

Manufacturer Part #: 275660
SKU: 275660
Brand: ZELLER + GMELIN

Zeller+Gmelin developed Multicut Flowgrind P 32 as a precision deburring product for the Bosch Group. Multicut Flowgrind P 32 is a lubricating oil that carries abrasive materials. It is zinc-free and chemically activated.

UOM : DR (55 GA)

Add to Quote
ZEL MULTIDRAW KTL N 1, 20 LITER PAIL

ZEL MULTIDRAW KTL N 1, 20 LITER PAIL

Manufacturer Part #: 96930-PAIL
SKU: 96930-PAIL
Brand: ZELLER + GMELIN

Multidraw KTL N 1 is a coil and blank washing oil used in sheet metal forming. It’s a mineral oil-based product that contains synthetic greasing agents and phosphorous additives. Multidraw KTL N 1 is used for cleaning in coil and blank washing systems before the forming operation.

UOM : PL (5 GA)

Add to Quote
ZEL MULTICUT BASIC 20 EXTRA 178KG DRUM

ZEL MULTICUT BASIC 20 EXTRA 178KG DRUM

Manufacturer Part #: 30540
SKU: 30540
Brand: ZELLER + GMELIN

Zeller+Gmelin’s Multicut Basic 20 Extra is a non-water-miscible, high-alloyed cutting oil with low viscosity. It’s made from mineral oils with low aromatic content.

UOM : DR (55 GA)

Add to Quote

HOUGHTO-QUENCH 100

Manufacturer Part #: 34010000009
SKU: 34010000009
Brand: HOUGHTON

Houghto-Quench 100 is a series of high-performance cold quenching oils. The series includes oils with normal, medium, and accelerated quenching speeds.

UOM : DR (54 GA)

Add to Quote

HOU CUT-MAX V10-EPS DRUM

Manufacturer Part #: 41001202009
SKU: 41001202009
Brand: HOUGHTON

Houghton Cut-Max V10-EPS is a cutting oil that can be used for non-ferrous and alloyed steels in the turned parts industry.

UOM : DR (54 GA)

Add to Quote
HOU MACRON 2438 M-8 US TOTE

HOU MACRON 2438 M-8 US TOTE

Manufacturer Part #: 41124388014
SKU: 41124388014
Brand: HOUGHTON

Macron 205 M-8 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

UOM : TO (330 GA)

Add to Quote

HOU ADRANA D 208 US DRUM

Manufacturer Part #: 42010208009
SKU: 42010208009
Brand: HOUGHTON

Houghton Adrana D 208 is a water-miscible metalworking fluid that can be used for easy to medium duty applications on ferrous metals. It is recommended for use on cast iron and low to medium alloyed ferrous metals.

UOM : DR (54 GA)

Add to Quote
  • « PREV
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • NEXT »