Search in Category
Filter Your Search
Shop by Category
METAL WORKING FLUIDS
TOTAL VULSOL 5000 DRUM
Total Vulsol 5000 is a heavy-duty, synthetic metalworking fluid. It’s recommended for metal cutting applications like broaching, boring, and thread cutting. Vulsol 5000 has excellent wetting and cooling capabilities, which can improve tolerances and surface finish on machinery parts.
TOT MARTOL LVG 5 CF PAIL
Total Martol LVG 5 CF is a fast-drying, chlorine-free, and aromatic-free metalworking oil. It has InS H1 accreditation for incidental food contact. It’s suitable for forming and assembly techniques and can be used for light to severe die-stamping operations. It leaves no residue after evaporation.
HOU RUST VETO 344 PAIL
Rust-Veto 344 is a fast-drying, solvent-based product that protects steel, iron, and other metals from rust and corrosion. It’s designed to protect equipment stored outdoors, even in severe conditions. The black, liquid product contains a volatile solvent that evaporates after application. It leaves a hard, black asphalt film that protects against corrosion for more than 36 months.
HOU RUST VETO 4214-W DRUM
Houghton Rust Veto 4214-W is a solvent-based rust preventative. It is a hydraulic fluid that is stable in wet conditions, especially where there is alkaline, acid, or solvent. Rust Veto 4214-W is a thin, water-displacing fluid that can resist alkaline, acid, and solvent emulsion cleaner carry-over.
HOU RUST VETO 4240 TOTE
Rust-Veto 4240 is a solvent-based rust preventative that displaces and separates water. It leaves a thin, dry-to-touch film that can provide up to one year of indoor rust protection. Rust-Veto 4240 is an industrial grease or light mineral oil that contains powerful rust inhibitors. It is used to lift or displace water during storage to maintain metal surfaces.
ZEL MULTIROLL CU PROTECT 10 LITER PAIL
Zeller+Gmelin’s Multiroll CU Protect is an additive that prevents corrosion for the Multiroll CU product line. It’s a fully synthetic, water-soluble drawing lubricant for copper and aluminum wire. It can be sprayed on to help with winding up the wire.
ZELLER MULTICUT DRUM 10 172KG DRUM
Zeller Multicut Drum 10 is a 172 kg drum of Multicut Ultra 10, a non-water-miscible, low-viscosity, high-performance cutting oil. It’s made from mineral oils that are low in aromatics and mist formation.
ZEL MULTICAL M5 - 170 KG DRUM
Multical M5 is a solvent-free calibration lubricant from Zeller+Gmelin. It is a mineral oil that contains calibration oil. Multical M5 is applied to sintered metal parts by injection. It has a density of 850 kg/m3 at 15°C and a viscosity of 10.5 mm2/s at 20°C.
HOU ENSIS DWO 600 DRUM
Houghton Ensis DWO 600 is a VOC-free, short-term rust preventive oil. It contains dewatering additives and film-forming substances. After drying, it leaves an oily film with dewatering properties.
ZEL MULTICUT FLOWGRIND P 32 180 KG DRUM
Zeller+Gmelin developed Multicut Flowgrind P 32 as a precision deburring product for the Bosch Group. Multicut Flowgrind P 32 is a lubricating oil that carries abrasive materials. It is zinc-free and chemically activated.