Browse Categories

Search in Category

METAL WORKING FLUIDS

Filter Your Search

Shop by Category

Loading...

METAL WORKING FLUIDS

OILS AND LUBRICANTS /INDUSTRIAL/METAL WORKING FLUIDS 
Viewing Page 20 of 22 (218 results)

HOU ENSIS D 662 DRUM

Manufacturer Part #: 26000662033
SKU: 26000662033
Brand: HOUGHTON

Houghton Ensis DW 662 is a high-quality, water-repellent anti-corrosion agent. It produces a thin, waxy film that resists cracking and neutralizes fingerprints. It is a medium-term rust preventive oil that leaves a waxy film with dewatering properties.

UOM : DR (55 GA)

Add to Quote

HOU ENSIS DWO 962 DRUM

Manufacturer Part #: 26000962006
SKU: 26000962006
Brand: HOUGHTON

Houghton Ensis DWO 962 is a solvent-based corrosion protection product for metal surfaces. It has dewatering properties and leaves an oily film that prevents sticking after it dries. It is suitable for metal surfaces that are likely to corrode in storage or use.

UOM : DR (55 GA)

Add to Quote

HOU DASCO GUARD 1917 DRUM

Manufacturer Part #: 26141892009
SKU: 26141892009
Brand: HOUGHTON

Houghton Dasco Guard 1917 is an oil-based rust preventive.

UOM : DR (54 GA)

Add to Quote
ZEL MULTIDRAW KTLN-16 LM 20 LITER PAIL

ZEL MULTIDRAW KTLN-16 LM 20 LITER PAIL

Manufacturer Part #: 26590-K030
SKU: 26590-K030
Brand: ZELLER + GMELIN

Multidraw KTL N 16 LM is a mineral oil-based drawing and punching oil from Zeller+Gmelin. It is non-water-miscible and contains synthetic greasing agents, corrosion inhibitors, and EP-additives. It is free from silicone oils and evaporates almost without any residues. Multidraw KTL N 16 LM is especially suitable for chipless sheet metal forming of aluminum.

UOM : PL (5 GA)

Add to Quote
HOU MARTEMP 355 QUENCH OIL TOTE

HOU MARTEMP 355 QUENCH OIL TOTE

Manufacturer Part #: 35355000014
SKU: 35355000014
Brand: HOUGHTON

Houghton MarTemp 355 is a high-performance, accelerated hot quenching oil. It’s designed for hot oil quenching applications where a high cooling rate is needed to achieve the optimum hardness and physical properties. It’s suitable for use at temperatures of up to 375oF (190oC).

UOM : TO (330 GA)

Add to Quote

HOU AQUA QUENCH 145 DRUM

Manufacturer Part #: 36214500009
SKU: 36214500009
Brand: HOUGHTON

Houghton Aqua-Quench 145 is a bio-stable polymer quenchant for induction hardening. It was the world’s first biostable polymer quenchant.

UOM : DR (54 GA)

Add to Quote

HOU AQUA QUENCH 364 DRUM

Manufacturer Part #: 362364
SKU: 362364
Brand: HOUGHTON

Houghton Aqua Quench 364 is a concentrated aqueous solution of poly-oxythylene glycol. It is inversely soluble in water and is inhibited against ferrous.

UOM : DR (55 GA)

Add to Quote
HOU AQUA QUENCH 245 PAIL

HOU AQUA QUENCH 245 PAIL

Manufacturer Part #: 36245000002
SKU: 36245000002
Brand: HOUGHTON

Houghton Aqua-Quench 245 is a bio-stable polymer quenchant that comes in a 5 gallon pail. It is designed for induction hardening and immersion quenching of higher hardenability steel alloys. The product is hazy in color and has a flash point of 0°F.

UOM : PL (5 GA)

Add to Quote

HOU AQUA QUENCH 251 DRUM

Manufacturer Part #: 36251000006
SKU: 36251000009
Brand: HOUGHTON

Houghton Aqua-Quench 251 is a water-soluble, non-flammable, oil-free quenchant. It is a versatile polymer that can be used to harden ferrous alloys and treat aluminum alloys. It is available in 205 liter drums.

UOM : DR (54 GA)

Add to Quote
HOU MACRON 2425 S-14 DRUM

HOU MACRON 2425 S-14 DRUM

Manufacturer Part #: 41002425009
SKU: 41002425009
Brand: HOUGHTON

Macron 2425 S-14 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces. Macron 2425 S-14 is chlorine and Zinc free.

UOM : DR (54 GA)

Add to Quote
  • « PREV
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • NEXT »