Search in Category
Filter Your Search
Shop by Category
METAL WORKING FLUIDS
HOU MARTEMP 355 QUENCH OIL TOTE
Houghton MarTemp 355 is a high-performance, accelerated hot quenching oil. It’s designed for hot oil quenching applications where a high cooling rate is needed to achieve the optimum hardness and physical properties. It’s suitable for use at temperatures of up to 375oF (190oC).
HOU MACRON EDM 130 DRUM
Houghton Macron EDM 130 is a dielectric fluid and high-quality electrical discharge machining oil. It’s a universal eroding oil that’s suitable for processing non-ferrous metals. It can be used with all standard electrode materials, such as copper or graphite.
HOU MACRON 2425 S-14 DRUM
Macron 2425 S-14 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces. Macron 2425 S-14 is chlorine and Zinc free.
HOU GARIA 601 M 22 DRUM
Houghton Garia 601 M-22 is a cutting oil used for machining and grinding high alloyed steels, stainless, heat resistant, or austenitic steels, and aluminum or magnesium alloys. It is a light-colored, medium viscosity oil with active sulfur. It is based on hydrotreated mineral oils with a low aromatic content and high content of polar and high-pressure additives.
HOU GARIA 621 CM 36 DRUM
Houghton Garia 621 CM-36 is a light-colored, anti-mist cutting oil. It’s designed for use in moderate to severe machining operations on a variety of ferrous alloys. It’s phosphorous free and contains active sulfur.
HOU GARIA 621 M 36 DRUM
Houghton Garia 621 M-36 is a light-colored, anti-mist, active sulfur cutting oil. It is designed for use in moderate to severe machining operations on a variety of ferrous alloys. It is particularly useful in form grinding applications and in deep hole drilling operations of metals.
HOU DASCO SPARK 1010 DRUM
Houghton Dasco Spark 1010 is a general-purpose oil for use in electrical discharge machines (EDMs). It’s designed to offer the best efficiency for a broad range of applications.
HOU HOUGHTO-GRIND 60 DRUM
Houghton Grind 60 is a synthetic chemical grinding fluid that provides rust protection for cast iron. It is oil and nitrite-free and does not contain petroleum oil. Houghton Grind 60 is formulated to give maximum rust protection.
HOU METALINA B 800 DRUM
Houghton Metalina B 800 is a synthetic blend of lubricants and corrosion inhibitors. It is a transparent, mineral oil-free solution. It is formulated for aeronautical aluminum and other aeronautical alloys. It is also recommended for machining.
HOU HOCUT 8640 DRUM
Houghton Hocut 8640 is a soluble oil metal removal fluid. It’s designed for heavy duty machining, grinding, and honing applications.