CIRCULATING OIL

Shell Heat Transfer S2 X is a premium quality heat transfer fluid for use in indirectly heated closed heat transfer systems. It is based on highly refined mineral oils that resist oil cracking, oxidation, and thickening. It also contains an oxidation inhibitor to provide a long service life.

Summit Syngear PG 680 is a polyalkylene-glycol-based (PAG-based) lubricant that is designed for a wide range of industrial gear applications. It provides excellent wear protection, very high film strength, enhanced oil life, resistance against water contamination, and superior carbon and varnish control.

Shell Turbo S4 GX 46 is a lubricating oil used in steam, gas, and combined cycle turbines. It’s designed to protect highly loaded gearboxes and provide enhanced anti-wear performance. The oil is based on Gas-to-Liquid (GTL) technology and is resistant to degradation, even under high oxidative and thermal stress.

OilPro developed VCI (Vapor Space Inhibiting) Circulating
Oil with an anti-rust compound which is oil soluble and
volatile. This corrosion inhibitor fills the vapor space above the
oil level to form a rust preventive barrier on exposed metal
surfaces and helps combat vapor space rusting.

OilPro developed VCI (Vapor Space Inhibiting) Circulating
Oil with an anti-rust compound which is oil soluble and
volatile. This corrosion inhibitor fills the vapor space above the
oil level to form a rust preventive barrier on exposed metal
surfaces and helps combat vapor space rusting.

Shell Rotella T1 30 is a heavy duty conventional diesel engine oil that is suitable for day-to-day use in turbo and non-turbocharged older engines. It has a low ash content which minimizes the formation of deposits and keeps intake ports clean. It is also suitable for use in mobile hydraulic and transmission systems, as well as for stop-start conditions in construction, mining, or quarry operations.

Shell Barrier Fluid is a high viscosity index synthetic fluid that can be used as a barrier or buffer fluid in seals. Barrier fluids are used in pressurized dual seals to isolate the pump process liquid from the environment. They lubricate and dissipate heat from the atmospheric side seal and the ID of the process side seal.

Brand: SHELL

 s3_gp_1500_sds

 s3_gp_1500_tds

Shell Omala S3 GP oils are specialist ‘problem solving’ lubricants developed to lubricate industrial gearboxes subject to extremely high and heavily shock loaded operations such as those found in steel, cement, mining and quarrying industries. They are formulated for use where ultra-high levels of extreme-pressure performance are required.

Brand: SHELL

 s2_p_100_sds

 s2_p_100_tds

Shell Corena S2 P is high quality air compressor oil designed to deliver the lubrication performance for high pressure reciprocating compressors. It is suitable for most reciprocating air compressors running at up to 220C discharge temperatures at elevated pressures.

Shell Omala S2 G 220 is a high quality extreme-pressure (EP) oil designed primarily for the lubrication of heavy duty industrial gears. It is an ISO VG 220 grade EP Gear Oil. It is formulated to resist thermal and chemical breakdown throughout the maintenance interval.